Get a Spooky 5% OFF on All SDR Products this Halloween! (Promotion has expired)

This Halloween, treat yourself to frightfully good savings on all SDR products! A 5% discount is automatically applied at checkout, no code required. But beware: this spooktacular offer vanishes on October 31st. Don’t miss out!

Promotion period: from 10/14/2025 to 10/31/2025

0.0
Disponibile
HUF 96,97231
+
Introduction The NFC Kill is the world's only RFID fuzzing tool. It is used to securely disable RFID badges, test RFID hardware, audit access control failure modes, and probe / exploit RFID attack surfaces during penetration testing. It is the only tool available to securely and...
EditionProfesssional
0.0
Disponibile
HUF 24,27692
+
Includes 1x YouLoop balun "Tee", 1x Coax Inverter Connector, 2x 1 meter semi-rigid coax loop cables, 1x 2m semi-rigid coax feedline. This is a super portable passive HF/VHF loop antenna designed for super low NF/MDS receivers like the Airspy HF+ Discovery. It also works to some extent with...
0.0
Disponibile
HUF 77,30769 HUF 91,42769 -15%
+
Malachite radio with medium and short wave option, dual antenna input, malahiteam DSP, 1) Based on SDR architecture, msi001 RF front-end is used for 12bit quantitative sampling, stm32h743 processor is used, and the main frequency is up to 480mhz; 2) The receiving frequency is 50 kHz to...
0.0
Disponibile
HUF 13,99692 HUF 16,61538 -16%
+
LILYGO LoRa32 V1.3 is a compact ESP32-based development board for LoRa, WiFi, and Bluetooth projects. It’s built around the SX1276 LoRa chip and supports both 868MHz and 915MHz bands, making it a flexible choice for IoT, wireless sensors, and remote monitoring. The board features a clear...
BoardWith Screen Frequency915MHz
0.0
Disponibile
HUF 13,99692 HUF 16,61538 -16%
+
LILYGO LoRa32 V1.3 is a compact ESP32-based development board for LoRa, WiFi, and Bluetooth projects. It’s built around the SX1276 LoRa chip and supports both 868MHz and 915MHz bands, making it a flexible choice for IoT, wireless sensors, and remote monitoring. The board features a clear...
BoardWith Screen Frequency868MHz
0.0
Disponibile
HUF 13,38154 HUF 16,61538 -19%
+
LILYGO LoRa32 V1.3 is a compact ESP32-based development board for LoRa, WiFi, and Bluetooth projects. It’s built around the SX1276 LoRa chip and supports both 868MHz and 915MHz bands, making it a flexible choice for IoT, wireless sensors, and remote monitoring. The board features a clear...
BoardWithout Screen Frequency868MHz
0.0
Disponibile
HUF 13,38154 HUF 16,61538 -19%
+
LILYGO LoRa32 V1.3 is a compact ESP32-based development board for LoRa, WiFi, and Bluetooth projects. It’s built around the SX1276 LoRa chip and supports both 868MHz and 915MHz bands, making it a flexible choice for IoT, wireless sensors, and remote monitoring. The board features a clear...
BoardWithout Screen Frequency915MHz
0.0
Disponibile
HUF 17,48000 HUF 19,32615 -10%
+
Difference Deauther OLED V6 Deauther Monster  18650 Battery 1 2 FlashLight LED 1 4 USB Output NO YES Arcylic Case YES YES Battery Indicate YES YES Charging Current 1A 1A Breakout GPIOs YES YES RTC DS3231 YES YES Antenna 8dB 8dB Weight...
Elevate your signal processing with our high linearity, ultra-low noise amplifier , designed for optimal performance across a wide frequency range. Key Features Frequency Range: 100KHz to 6GHz Ultra-Low Noise Figure: 0.4 dB NF at 1.95 GHz High Gain: 20 dB at 1.95 GHz High...
VersionWithout Battery
Elevate your signal processing with our high linearity, ultra-low noise amplifier , designed for optimal performance across a wide frequency range. Key Features Frequency Range: 100KHz to 6GHz Ultra-Low Noise Figure: 0.4 dB NF at 1.95 GHz High Gain: 20 dB at 1.95 GHz High...
VersionWith Battery
T-Display-S3 Introduction The T-Display series has added a new member. It comes with the latest ESP32-S3 [Wi-Fi 802.11, BLE 5 + BT mesh]. The screen has also been expanded from the original 1.14 inches to 1.9 inches, and an acrylic plate has been added to fix it. This will be the second...
ColorGrey
This low noise amplifier (LNA) is designed for a wide range of RF receiving front-ends, offering high gain and a small noise figure to significantly enhance communication distance. It is ideal for applications like shortwave , FM broadcasting , remote control receivers , cable TV signal...
LILYGO TTGO T-SIM7000G is a small board for IoT and NB-IoT projects. It runs on an ESP32 and supports SIM7000G, SIM7000E, SIM7000A, and SIM7000JC modules. You get WiFi, Bluetooth 4.2, GPS, and your choice of 4MB or 16MB flash with 8MB PSRAM. The board is updated with better battery...
LILYGO TTGO T-SIM7000G is a small board for IoT and NB-IoT projects. It runs on an ESP32 and supports SIM7000G, SIM7000E, SIM7000A, and SIM7000JC modules. You get WiFi, Bluetooth 4.2, GPS, and your choice of 4MB or 16MB flash with 8MB PSRAM. The board is updated with better battery...
LILYGO TTGO T-SIM7000G is a small board for IoT and NB-IoT projects. It runs on an ESP32 and supports SIM7000G, SIM7000E, SIM7000A, and SIM7000JC modules. You get WiFi, Bluetooth 4.2, GPS, and your choice of 4MB or 16MB flash with 8MB PSRAM. The board is updated with better battery...
LILYGO TTGO T-SIM7000G is a small board for IoT and NB-IoT projects. It runs on an ESP32 and supports SIM7000G, SIM7000E, SIM7000A, and SIM7000JC modules. You get WiFi, Bluetooth 4.2, GPS, and your choice of 4MB or 16MB flash with 8MB PSRAM. The board is updated with better battery...
LILYGO TTGO T-SIM7000G is a small board for IoT and NB-IoT projects. It runs on an ESP32 and supports SIM7000G, SIM7000E, SIM7000A, and SIM7000JC modules. You get WiFi, Bluetooth 4.2, GPS, and your choice of 4MB or 16MB flash with 8MB PSRAM. The board is updated with better battery...
0.0
Disponibile
HUF 38,74154 HUF 40,00000 -3%
+
The LILYGO T-WATCH-S3 Plus is a feature-rich ESP32-S3 smartwatch development board for IoT, wearables, and smart projects. It offers 16MB Flash, 8MB PSRAM, and supports Arduino-IDE, ESP-IDF, VS Code, and MicroPython. Wireless: Wi-Fi 802.11b/g/n, Bluetooth BLE 5.0, SX1262 LoRa...
Frequency433MHz
0.0
Disponibile
HUF 36,89538 HUF 40,00000 -8%
+
The LILYGO T-WATCH-S3 Plus is a feature-rich ESP32-S3 smartwatch development board for IoT, wearables, and smart projects. It offers 16MB Flash, 8MB PSRAM, and supports Arduino-IDE, ESP-IDF, VS Code, and MicroPython. Wireless: Wi-Fi 802.11b/g/n, Bluetooth BLE 5.0, SX1262 LoRa...
Frequency868MHz
0.0
Disponibile
HUF 36,89538 HUF 40,00000 -8%
+
The LILYGO T-WATCH-S3 Plus is a feature-rich ESP32-S3 smartwatch development board for IoT, wearables, and smart projects. It offers 16MB Flash, 8MB PSRAM, and supports Arduino-IDE, ESP-IDF, VS Code, and MicroPython. Wireless: Wi-Fi 802.11b/g/n, Bluetooth BLE 5.0, SX1262 LoRa...
Frequency915MHz
0.0
Disponibile
HUF 37,81846 HUF 40,00000 -5%
+
The LILYGO T-WATCH-S3 Plus is a feature-rich ESP32-S3 smartwatch development board for IoT, wearables, and smart projects. It offers 16MB Flash, 8MB PSRAM, and supports Arduino-IDE, ESP-IDF, VS Code, and MicroPython. Wireless: Wi-Fi 802.11b/g/n, Bluetooth BLE 5.0, SX1262 LoRa...
Frequency2.4Ghz
The MicroPhase ANTSDR E316 is a portable 2×2 MIMO Software Defined Radio (SDR) demo board based on the ADI AD9361/AD9363 RFIC and Xilinx Zynq-7020 SoC . It covers 70 MHz–6 GHz with up to 56 MHz instantaneous bandwidth , and features 1 GB DDR3, 256 Mb QSPI flash, Gigabit Ethernet,...
Brand NameMicroPhase ChipsetAD9363
The MicroPhase ANTSDR E316 is a portable 2×2 MIMO Software Defined Radio (SDR) demo board based on the ADI AD9361/AD9363 RFIC and Xilinx Zynq-7020 SoC . It covers 70 MHz–6 GHz with up to 56 MHz instantaneous bandwidth , and features 1 GB DDR3, 256 Mb QSPI flash, Gigabit Ethernet,...
Brand NameMicroPhase ChipsetAD9361
This debugged finished product is ready to enhance your radio performance. Designed for direct connection to radios, it features an integrated transceiver switching mechanism. Utilizing an AB linear amplifier , this device efficiently amplifies power for SSB, CW, AM, and FM transmissions....
0.0
Disponibile
HUF 14,89846 HUF 18,46154 -19%
+
The LILYGO TTGO MySondy GO V2.1 is a compact and versatile receiver designed for RadioSonde signal acquisition and IoT applications. Built on the ESP32 platform with 4MB flash memory, it delivers reliable wireless connectivity through integrated WiFi 802.11 and Bluetooth V4.2 + LE. The device...
Frequency433MHz
The LibreSDR B210 Mini / B220 Mini is a compact, full-featured software-defined radio (SDR) development board, fully compatible with B210 on Windows and Linux. Two models are available: B210 Mini (XC7A100T+AD9363) and B220 Mini (XC7A200T+AD9361); both offer the same functions but differ in...
BoardB220 mini
The LibreSDR B210 Mini / B220 Mini is a compact, full-featured software-defined radio (SDR) development board, fully compatible with B210 on Windows and Linux. Two models are available: B210 Mini (XC7A100T+AD9363) and B220 Mini (XC7A200T+AD9361); both offer the same functions but differ in...
BoardB210 mini
0.0
Disponibile
HUF 75,32308
+
Introduction The NFC Kill is the world's only RFID fuzzing tool. It is used to securely disable RFID badges, test RFID hardware, audit access control failure modes, and probe / exploit RFID attack surfaces during penetration testing. It is the only tool available to securely and...
EditionStandard
0.0
Disponibile
HUF 615,38462 HUF 695,38462 -12%
+
USRP B210 is a highly integrated, dual-channel USB Software Defined Radio (SDR) platform, perfect for advanced wireless research, IoT prototyping, and SDR development. Powered by the Analog Devices AD9361 RFIC , it supports 2x2 MIMO operation and covers a continuous frequency range from...
0.0
_out_of_stock
HUF 53,53846 HUF 57,53846 -7%
+
The HackRF R10C SDR Board offers wide frequency coverage from 1MHz to 6GHz, providing exceptional flexibility for capturing, decoding, and analyzing wireless communication signals across GSM, LTE, Wi-Fi, ISM bands, and more. Built for consistent performance and accurate signal...
BundleBundle 1 BundleBundle 2
0.0
_out_of_stock
HUF 49,23077 HUF 57,53846 -14%
+
The HackRF R10C SDR Board offers wide frequency coverage from 1MHz to 6GHz, providing exceptional flexibility for capturing, decoding, and analyzing wireless communication signals across GSM, LTE, Wi-Fi, ISM bands, and more. Built for consistent performance and accurate signal...
BundleBundle 1 BundleBundle 1
0.0
Disponibile
HUF 58,15385
+
The HackRF R10C SDR Board offers wide frequency coverage from 1MHz to 6GHz, providing exceptional flexibility for capturing, decoding, and analyzing wireless communication signals across GSM, LTE, Wi-Fi, ISM bands, and more. Built for consistent performance and accurate signal...
BundleBundle 1 BundleBundle 3
Show other 32 products
Product filters
Connector Type
Power
Filter by Rating
Price
HUF
HUF
  • HUF 4067
  • HUF 12307693
Free shipping
Brand
Colors
Battery powered
Display included
External reference clock I/O
HackRF board included
Host interface
Maximum measurement frequency
MHz
MHz
  • 3000MHz
  • 6200MHz
Maximum sweep points
points
points
  • 101points
  • 801points
Measurement capabilities
Minimum measurement frequency
MHz
MHz
  • 0MHz
  • 35MHz
RX maximum frequency
MHz
MHz
  • 6000MHz
  • 6000MHz
RX minimum frequency
MHz
MHz
  • 1MHz
  • 1MHz
Signal generator
Standalone operation without computer
Touchscreen support
Tracking generator
TX maximum frequency
MHz
MHz
  • 6000MHz
  • 6000MHz
TX minimum frequency
MHz
MHz
  • 1MHz
  • 1MHz