Summer Savings: 5% Off Everything at SDRstore.eu! (Promotion has expired)

Enjoy 5% off our entire product range at SDRstore.eu! For a limited time, you can save on all products—no exceptions. Whether you’re upgrading your radio gear or exploring new SDR solutions, now is the perfect time to shop and save.

Promotion period: from 08/21/2025 to 08/29/2025

Disaster-Radio offers a groundbreaking off-grid , solar-powered , long-range mesh network based on open-source software and affordable hardware . The LoRa32 V2.1_1.6.1 module, featuring an ESP32 microcontroller, is designed to provide reliable communication in disaster scenarios,...
Frequency433MHz
Disaster-Radio offers a groundbreaking off-grid , solar-powered , long-range mesh network based on open-source software and affordable hardware . The LoRa32 V2.1_1.6.1 module, featuring an ESP32 microcontroller, is designed to provide reliable communication in disaster scenarios,...
Frequency868MHz
Disaster-Radio offers a groundbreaking off-grid , solar-powered , long-range mesh network based on open-source software and affordable hardware . The LoRa32 V2.1_1.6.1 module, featuring an ESP32 microcontroller, is designed to provide reliable communication in disaster scenarios,...
Frequency915MHz
RF Power Amplifier with High Gain and Wide Frequency Range Important Notice: The RF power amplifier is a sensitive component. Always connect the input and output before powering it on, and ensure proper impedance matching to avoid damage. Technical Specifications: Power Supply...
Upgrades of HackRF One R9: MAX2837 is replaced by MAX2839. Si5351C is replaced by Si5351A with additional clock distribution. A series diode is added to the antenna port power supply. Attention: 1. The latest firmware is supported, and the current firmware is Mayhem...
BundleBundle 2
0.0
In stock
MXN 1,37922
+
★【About New Programming and Software】 The DR-1801 is upgraded from the DM-1801. In order to distinguish the old version, it adopts a new programming software, which is compatible with the PL-2303 programming cable, which easily solves the problem of the DMR digital two way radio programming....
BundleBundle 1
• Dual Band Ham Two Way Radio : This walkie talkie has both VHF and UHF bands, allowing you to communicate over a wider range of frequencies. • FM Radio : With an FM radio built-in, you can listen to your favorite stations while on the go. • Handheld Transceiver : The handheld design...
Brand NameBaofeng Kit8W cable
Das LILYGO® T-Embed ESP32-S3 CC1101 ist ein leistungsstarkes, stromsparendes Funkmodul, das für IoT-Anwendungen entwickelt wurde. Mit einem Dual-Core-ESP32-S3-Mikroprozessor, integriertem 2,4-GHz-Wi-Fi und BLE 5 sowie fortschrittlichen RF-Fähigkeiten mit dem CC1101-Transceiver ist dieses...
ColorBlack
Compared with PM3 RD V2.0 improvement: 1. Built-in high-frequency antenna, antenna depth matching, eliminate blind spots, read the whole card data flowing without interruption. 2. increase Parse the secret key rate , the size of the card takes all. 3. sniffing data, complete stable, low...
BundleBundle 2
Disclaimer: * Evil Crow RF V2 is a basic device for professionals and cyber-security enthusiasts. * We are not responsible for the incorrect use of Evil Crow RF V2. We recommend using this device for testing, learning and fun. * Be careful with this device and the transmission of signals. Make...
BundleBundle 1
0.0
In stock
MXN 1,99169 MXN 2,42459 -18%
+
WHAT IS IT? Deauther Watch V3S is the updated version of the old V3. With the latest Deauther software, you can perform various attacks to test WiFi networks. Please note that ESP8266 only supports 2.4GHz frequency. Additionally, you can utilize it for developing your own software. It is...
Upgrades des HackRF One R9: MAX2837 wird durch MAX2839 ersetzt. Si5351C wird durch Si5351A mit zusätzlicher Taktverteilung ersetzt. Die Stromversorgung des Antennenports wird durch eine Seriendiode ergänzt. Aufmerksamkeit: 1. Die neueste Firmware wird unterstützt, und die aktuelle...
BundleBundle 5
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
LILYGO TTGO T-SIM7600 ist ein vielseitiges ESP32-Entwicklungsboard, das Hochgeschwindigkeits-LTE Cat4/1 4G-Konnektivität für Ihre IoT- und M2M-Projekte bietet. Das Board basiert auf dem ESP32-WROVER und dem SIM7600-Modul und bietet WiFi, Bluetooth 4.2 und globale Mobilfunkunterstützung sowie...
0.0
In stock
MXN 6,57056 MXN 6,88225 -5%
+
INTRODUCTION The Proxmark 3 is a dedicated, highly-capable multi-tool for RFID analysis, providing reading, writing, analysis, snooping, replaying, emulation, modulation, demodulation, decoding, encoding, decryption, encryption for any RFID system operating in the 125KHz, 134KHz...
Das ESP32 MDK Extension Board ist ein leistungsstarkes, kompaktes Entwicklermodul für Portapack H4M und HackRF SDR Projekte. Es basiert auf einem Dual-Core ESP32-Prozessor mit integriertem Wi-Fi und Bluetooth und ermöglicht HackRF- und Portapack-Benutzern die Steuerung von Funksignalen,...
0.0
In stock
MXN 16,81177 MXN 19,04762 -12%
+
Das LimeSDR Mini Entwicklungsboard ist eine Hardware-Plattform für die Entwicklung und das Prototyping von leistungsstarken und logikintensiven Digital- und RF-Designs, die den MAX 10 FPGA von Altera und den LMS7002M RF-Transceiver von Lime Microsystems verwenden. LimeSDR vs. LimeSDR Mini...
Der USRP X310 ist eine hochleistungsfähige Software Defined Radio (SDR) -Plattform der nächsten Generation, die für fortschrittliche drahtlose Forschung und kundenspezifische Entwicklung entwickelt wurde. Sie verfügt über 2 TX/RX-Kanäle mit einem Frequenzbereich von DC bis 6 GHz und bis...
Dual Band : The walkie talkie operates on both VHF and UHF bands, providing reliable communication over a wide range of frequencies. • High Power : With an output power of 5w-10w, this walkie talkie can communicate over long distances of up to 16 km. • Waterproof : The walkie talkie is...
Brand NameBaofeng ColorOrange
In stock
MXN 11,40173
+
iCopy-X: Introduction Getting to know the ultimate RFID Cloner The ICopy-X is the next generation of RFID Cloning tool. Whether you're a pentester, researchers, locksmith, hobbiest or building manager, the iCopy-X makes cloning RFID tags rapid and easy. Built around the...
EditionIntermediate
✧  [Digital & Analog Compatible]  - FCC Part90 Certification ID: 2AJGM-DM1701. The Baofeng DM-1701 boasts seamless compatibility with both digital and analog modes, covering dual band VHF/UHF frequencies of 136-174 and 400-470 MHz. With an expansive capacity of up to 3,000 Channels,...
Brand NameBaofeng BundleBundle 2
LILYGO Paxcounter Disaster-Radio LoRa V2.1_1.6.1 ESP32 433/868/915MHZ 0.96 Inch OLED SD Card Slot Bluetooth WIFI Module Metering Passenger Flows Main features: Digital RSSI function Automatic frequency correction Automatic gain control Fast wake-up and frequency hopping Highly...
Frequency868MHz
LILYGO Paxcounter Disaster-Radio LoRa V2.1_1.6.1 ESP32 433/868/915MHZ 0.96 Inch OLED SD Card Slot Bluetooth WIFI Module Metering Passenger Flows Main features: Digital RSSI function Automatic frequency correction Automatic gain control Fast wake-up and frequency hopping Highly...
Frequency915MHz
LILYGO Paxcounter Disaster-Radio LoRa V2.1_1.6.1 ESP32 433/868/915MHZ 0.96 Inch OLED SD Card Slot Bluetooth WIFI Module Metering Passenger Flows Main features: Digital RSSI function Automatic frequency correction Automatic gain control Fast wake-up and frequency hopping Highly...
Frequency433MHz
The RVPA11000-1 is a high-performance broadband RF power amplifier featuring a P-channel LMOS tube as the final amplifier stage. It delivers an impressive 37 dB small signal linear gain across a wide frequency range of 1MHz to 1GHz, making it ideal for demanding RF applications. With a...
Upgrades des HackRF One R9: MAX2837 wird durch MAX2839 ersetzt. Si5351C wird durch Si5351A mit zusätzlicher Taktverteilung ersetzt. Die Stromversorgung des Antennenports wird durch eine Seriendiode ergänzt. Aufmerksamkeit: 1. Die neueste Firmware wird unterstützt, und die aktuelle...
BundleBundle 4
What is it? It is an upgrade version of Deauth detector. When you are under deauther attack, LED of detector will turn red and music is played at the same time. It is pre-flashed with DETECTOR software. You can download detector software from https://github.com/spacehuhn/D......
T-Display-S3 Introduction The T-Display series has added a new member. It comes with the latest ESP32-S3 [Wi-Fi 802.11, BLE 5 + BT mesh]. The screen has also been expanded from the original 1.14 inches to 1.9 inches, and an acrylic plate has been added to fix it. This will be the second...
ColorBlack
The LibreVNA is a cutting-edge USB-based 2-port vector network analyzer designed for precision RF measurements from 100kHz to 6GHz. Featuring simultaneous dual-port sampling via 3 ADCs and FPGA processing, it captures 10,000+ measurement points in under 1 second. Encased in CNC-machined...
0.0
In stock
MXN 1,20450 MXN 1,26805 -5%
+
Das LILYGO® T-Embed ESP32-S3 ist ein vielseitiges, einbettbares Entwicklungsboard, das für kundenspezifische Bedienfeldanwendungen entwickelt wurde. Ausgestattet mit einem 1,9-Zoll-Vollfarb-TFT-LCD-Display und angetrieben durch den Dual-Core-Mikroprozessor ESP32-S3, bietet dieses Modul...
0.0
In stock
MXN 1,20450 MXN 1,26805 -5%
+
Das LILYGO® T-Embed ESP32-S3 ist ein vielseitiges, einbettbares Entwicklungsboard, das für kundenspezifische Bedienfeldanwendungen entwickelt wurde. Ausgestattet mit einem 1,9-Zoll-Vollfarb-TFT-LCD-Display und angetrieben durch den Dual-Core-Mikroprozessor ESP32-S3, bietet dieses Modul...
0.0
In stock
MXN 1,20450 MXN 1,26805 -5%
+
Das LILYGO® T-Embed ESP32-S3 ist ein vielseitiges, einbettbares Entwicklungsboard, das für kundenspezifische Bedienfeldanwendungen entwickelt wurde. Ausgestattet mit einem 1,9-Zoll-Vollfarb-TFT-LCD-Display und angetrieben durch den Dual-Core-Mikroprozessor ESP32-S3, bietet dieses Modul...
0.0
In stock
MXN 1,20450 MXN 1,26805 -5%
+
Das LILYGO® T-Embed ESP32-S3 ist ein vielseitiges, einbettbares Entwicklungsboard, das für kundenspezifische Bedienfeldanwendungen entwickelt wurde. Ausgestattet mit einem 1,9-Zoll-Vollfarb-TFT-LCD-Display und angetrieben durch den Dual-Core-Mikroprozessor ESP32-S3, bietet dieses Modul...
0.0
In stock
MXN 1,20450 MXN 1,26805 -5%
+
Das LILYGO® T-Embed ESP32-S3 ist ein vielseitiges, einbettbares Entwicklungsboard, das für kundenspezifische Bedienfeldanwendungen entwickelt wurde. Ausgestattet mit einem 1,9-Zoll-Vollfarb-TFT-LCD-Display und angetrieben durch den Dual-Core-Mikroprozessor ESP32-S3, bietet dieses Modul...
LILYGO TTGO T-A7670G/E/SA R2 is a small, capable board for 4G IoT and embedded projects. It runs on an ESP32 MCU at 240MHz, with 4MB flash and 8MB PSRAM, and includes a CAT1 LTE module for mobile data and SIM support. You get Wi-Fi 802.11 b/g/n and Bluetooth 4.2 for flexible wireless...
GPSBuilt-in GPS SignalA7670SA(2G 4G)
LILYGO TTGO T-A7670G/E/SA R2 is a small, capable board for 4G IoT and embedded projects. It runs on an ESP32 MCU at 240MHz, with 4MB flash and 8MB PSRAM, and includes a CAT1 LTE module for mobile data and SIM support. You get Wi-Fi 802.11 b/g/n and Bluetooth 4.2 for flexible wireless...
GPSWithout GPS SignalA7670SA(2G 4G)
LILYGO TTGO T-A7670G/E/SA R2 is a small, capable board for 4G IoT and embedded projects. It runs on an ESP32 MCU at 240MHz, with 4MB flash and 8MB PSRAM, and includes a CAT1 LTE module for mobile data and SIM support. You get Wi-Fi 802.11 b/g/n and Bluetooth 4.2 for flexible wireless...
GPSWithout GPS SignalA7670G ( 2G 4G )
LILYGO TTGO T-A7670G/E/SA R2 is a small, capable board for 4G IoT and embedded projects. It runs on an ESP32 MCU at 240MHz, with 4MB flash and 8MB PSRAM, and includes a CAT1 LTE module for mobile data and SIM support. You get Wi-Fi 802.11 b/g/n and Bluetooth 4.2 for flexible wireless...
GPSWithout GPS SignalA7670E (4G No SMS)
LILYGO TTGO T-A7670G/E/SA R2 is a small, capable board for 4G IoT and embedded projects. It runs on an ESP32 MCU at 240MHz, with 4MB flash and 8MB PSRAM, and includes a CAT1 LTE module for mobile data and SIM support. You get Wi-Fi 802.11 b/g/n and Bluetooth 4.2 for flexible wireless...
GPSWithout GPS SignalA7670E (2G 4G)
LILYGO TTGO T-A7670G/E/SA R2 is a small, capable board for 4G IoT and embedded projects. It runs on an ESP32 MCU at 240MHz, with 4MB flash and 8MB PSRAM, and includes a CAT1 LTE module for mobile data and SIM support. You get Wi-Fi 802.11 b/g/n and Bluetooth 4.2 for flexible wireless...
GPSBuilt-in GPS SignalA7670E (2G 4G)
LILYGO TTGO T-A7670G/E/SA R2 is a small, capable board for 4G IoT and embedded projects. It runs on an ESP32 MCU at 240MHz, with 4MB flash and 8MB PSRAM, and includes a CAT1 LTE module for mobile data and SIM support. You get Wi-Fi 802.11 b/g/n and Bluetooth 4.2 for flexible wireless...
GPSBuilt-in GPS SignalA7670E (4G No SMS)
LILYGO TTGO T-A7670G/E/SA R2 is a small, capable board for 4G IoT and embedded projects. It runs on an ESP32 MCU at 240MHz, with 4MB flash and 8MB PSRAM, and includes a CAT1 LTE module for mobile data and SIM support. You get Wi-Fi 802.11 b/g/n and Bluetooth 4.2 for flexible wireless...
GPSExternal GPS SignalA7670E (4G No SMS)
LILYGO TTGO T-A7670G/E/SA R2 is a small, capable board for 4G IoT and embedded projects. It runs on an ESP32 MCU at 240MHz, with 4MB flash and 8MB PSRAM, and includes a CAT1 LTE module for mobile data and SIM support. You get Wi-Fi 802.11 b/g/n and Bluetooth 4.2 for flexible wireless...
GPSBuilt-in GPS SignalA7670G ( 2G 4G )
LILYGO TTGO T-A7670G/E/SA R2 is a small, capable board for 4G IoT and embedded projects. It runs on an ESP32 MCU at 240MHz, with 4MB flash and 8MB PSRAM, and includes a CAT1 LTE module for mobile data and SIM support. You get Wi-Fi 802.11 b/g/n and Bluetooth 4.2 for flexible wireless...
GPSExternal GPS SignalA7670E (2G 4G)
LILYGO TTGO T-A7670G/E/SA R2 is a small, capable board for 4G IoT and embedded projects. It runs on an ESP32 MCU at 240MHz, with 4MB flash and 8MB PSRAM, and includes a CAT1 LTE module for mobile data and SIM support. You get Wi-Fi 802.11 b/g/n and Bluetooth 4.2 for flexible wireless...
GPSExternal GPS SignalA7670SA(2G 4G)
LILYGO TTGO T-A7670G/E/SA R2 is a small, capable board for 4G IoT and embedded projects. It runs on an ESP32 MCU at 240MHz, with 4MB flash and 8MB PSRAM, and includes a CAT1 LTE module for mobile data and SIM support. You get Wi-Fi 802.11 b/g/n and Bluetooth 4.2 for flexible wireless...
GPSExternal GPS SignalA7670G ( 2G 4G )
The LILYGO TTGO T-Call V1.4 is a handy ESP32 board with built-in SIM800L GSM/GPRS, WiFi, and Bluetooth 4.2. It’s a solid choice for IoT, remote monitoring, and Arduino projects where you need both cellular and wireless connectivity. The board includes 4MB Flash and 8MB PSRAM, giving you plenty...
Memory8MB
The LILYGO TTGO T-Call V1.4 is a handy ESP32 board with built-in SIM800L GSM/GPRS, WiFi, and Bluetooth 4.2. It’s a solid choice for IoT, remote monitoring, and Arduino projects where you need both cellular and wireless connectivity. The board includes 4MB Flash and 8MB PSRAM, giving you plenty...
Memory4MB
• Maximum Range of 3km-5km : Stay connected with a maximum range of 3km-5km, allowing you to communicate effectively in remote areas. • IP67 Waterproof/Water-Resistant : The walkie talkie is waterproof/water-resistant with an IP67 rating, making it suitable for use in all weather...
Brand NameBaofeng ColorGreen
Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino. Specifications: GPS NE0-6M GPS Modules: Support GPS protocol Onboard RTC crystal, Support interrupt/ wakeup LoRa...
BoardSoldered OLED Frequency433MHz
0.0
In stock
MXN 2,59636 MXN 2,85714 -9%
+
The MicroPhase A7-Lite is a versatile Artix-7 FPGA demo board available in three densities: XC7A35T, XC7A100T, and XC7A200T. Each model features abundant logic cells, DSP slices, Block RAM, and a 4 Gbit DDR3 interface, packaged in a compact 80 × 56 mm form factor. Key Features and...
The MicroPhase A7-Lite is a versatile Artix-7 FPGA demo board available in three densities: XC7A35T, XC7A100T, and XC7A200T. Each model features abundant logic cells, DSP slices, Block RAM, and a 4 Gbit DDR3 interface, packaged in a compact 80 × 56 mm form factor. Key Features and...
0.0
In stock
MXN 1,96242 MXN 2,10095 -7%
+
The Crazyradio PA is a powerful USB radio transceiver based on the Nordic Semiconductor nRF24LU1+ chip, operating in the 2.4GHz ISM band. Designed for wireless development, testing, and experimentation, it supports a wide range of open-source projects such as Mousejack, Keyjack, Keysniffer,...
The MicroPhase A7-Lite is a versatile Artix-7 FPGA demo board available in three densities: XC7A35T, XC7A100T, and XC7A200T. Each model features abundant logic cells, DSP slices, Block RAM, and a 4 Gbit DDR3 interface, packaged in a compact 80 × 56 mm form factor. Key Features and...
High-Performance Amplifier for Beidou/GPS and More Discover the versatility of this  High-Performance Amplifier , engineered for a range of applications, including Beidou/GPS reception, FM radio, radar systems, and software-defined radio. This compact yet powerful device is perfect for...
The LILYGO T5S3 Pro is a modern e-paper development board combining a crisp 4.7-inch display with 16 gray levels and ultra-low power operation. Featuring the powerful ESP32-S3 with 16MB flash and 8MB PSRAM, this board offers robust wireless options—2.4GHz WiFi, Bluetooth 5, and an SX1262...
Frequency915MHz GPSWithout GPS
The LILYGO T5S3 Pro is a modern e-paper development board combining a crisp 4.7-inch display with 16 gray levels and ultra-low power operation. Featuring the powerful ESP32-S3 with 16MB flash and 8MB PSRAM, this board offers robust wireless options—2.4GHz WiFi, Bluetooth 5, and an SX1262...
Frequency915MHz GPSBuilt-in GPS
The LILYGO T5S3 Pro is a modern e-paper development board combining a crisp 4.7-inch display with 16 gray levels and ultra-low power operation. Featuring the powerful ESP32-S3 with 16MB flash and 8MB PSRAM, this board offers robust wireless options—2.4GHz WiFi, Bluetooth 5, and an SX1262...
Frequency433MHz GPSBuilt-in GPS
The LILYGO T5S3 Pro is a modern e-paper development board combining a crisp 4.7-inch display with 16 gray levels and ultra-low power operation. Featuring the powerful ESP32-S3 with 16MB flash and 8MB PSRAM, this board offers robust wireless options—2.4GHz WiFi, Bluetooth 5, and an SX1262...
Frequency868MHz GPSBuilt-in GPS
The LILYGO T5S3 Pro is a modern e-paper development board combining a crisp 4.7-inch display with 16 gray levels and ultra-low power operation. Featuring the powerful ESP32-S3 with 16MB flash and 8MB PSRAM, this board offers robust wireless options—2.4GHz WiFi, Bluetooth 5, and an SX1262...
Frequency868MHz GPSWithout GPS
The LILYGO T5S3 Pro is a modern e-paper development board combining a crisp 4.7-inch display with 16 gray levels and ultra-low power operation. Featuring the powerful ESP32-S3 with 16MB flash and 8MB PSRAM, this board offers robust wireless options—2.4GHz WiFi, Bluetooth 5, and an SX1262...
Frequency433MHz GPSWithout GPS
✧  [Digital & Analog Compatible]  - FCC Part90 Certification ID: 2AJGM-DM1701. The Baofeng DM-1701 boasts seamless compatibility with both digital and analog modes, covering dual band VHF/UHF frequencies of 136-174 and 400-470 MHz. With an expansive capacity of up to 3,000 Channels,...
Brand NameBaofeng BundleBundle 1
0.0
In stock
MXN 2,61368 MXN 3,24052 -19%
+
The Microphase Z7-Nano is a compact FPGA development board featuring the Xilinx Zynq-7000 SoC in two variants: Z7-Nano 7010 (XC7Z010CLG400-1) with 28K logic cells and 667 MHz dual-core Cortex-A9, or Z7-Nano 7020 (XC7Z020CLG400-2) with 85K logic cells and 766 MHz dual-core Cortex-A9....
The Microphase Z7-Nano is a compact FPGA development board featuring the Xilinx Zynq-7000 SoC in two variants: Z7-Nano 7010 (XC7Z010CLG400-1) with 28K logic cells and 667 MHz dual-core Cortex-A9, or Z7-Nano 7020 (XC7Z020CLG400-2) with 85K logic cells and 766 MHz dual-core Cortex-A9....
0.0
In stock
MXN 5,45732
+
Introduction The NFC Kill is the world's only RFID fuzzing tool. It is used to securely disable RFID badges, test RFID hardware, audit access control failure modes, and probe / exploit RFID attack surfaces during penetration testing. It is the only tool available to securely and...
EditionProfesssional
Dual Band : The walkie talkie operates on both VHF and UHF bands, providing reliable communication over a wide range of frequencies. • High Power : With an output power of 5w-10w, this walkie talkie can communicate over long distances of up to 16 km. • Waterproof : The walkie talkie is...
Brand NameBaofeng ColorGreen
Dual Band : The walkie talkie operates on both VHF and UHF bands, providing reliable communication over a wide range of frequencies. • High Power : With an output power of 5w-10w, this walkie talkie can communicate over long distances of up to 16 km. • Waterproof : The walkie talkie is...
Brand NameBaofeng ColorBlack
Inhaltet 1x YouLoop Balun "Tee", 1x Coax Inverter Connector, 2x 1 Meter semi-rigid Koax Loop Kabel, 1x 2m semi-rigid Koax Feedline. Dies ist eine super portable passive HF/VHF-Schleifenantenne, die für Super Low NF/MDS-Empfänger wie den Airspy HF+ Discovery entwickelt wurde. Sie funktioniert...
Malachite radio with medium and short wave option, dual antenna input, malahiteam DSP, 1) Based on SDR architecture, msi001 RF front-end is used for 12bit quantitative sampling, stm32h743 processor is used, and the main frequency is up to 480mhz; 2) The receiving frequency is 50 kHz to...
LILYGO LoRa32 V1.3 is a compact ESP32-based development board for LoRa, WiFi, and Bluetooth projects. It’s built around the SX1276 LoRa chip and supports both 868MHz and 915MHz bands, making it a flexible choice for IoT, wireless sensors, and remote monitoring. The board features a clear...
BoardWith Screen Frequency915MHz
LILYGO LoRa32 V1.3 is a compact ESP32-based development board for LoRa, WiFi, and Bluetooth projects. It’s built around the SX1276 LoRa chip and supports both 868MHz and 915MHz bands, making it a flexible choice for IoT, wireless sensors, and remote monitoring. The board features a clear...
BoardWithout Screen Frequency868MHz
LILYGO LoRa32 V1.3 is a compact ESP32-based development board for LoRa, WiFi, and Bluetooth projects. It’s built around the SX1276 LoRa chip and supports both 868MHz and 915MHz bands, making it a flexible choice for IoT, wireless sensors, and remote monitoring. The board features a clear...
BoardWithout Screen Frequency915MHz
LILYGO LoRa32 V1.3 is a compact ESP32-based development board for LoRa, WiFi, and Bluetooth projects. It’s built around the SX1276 LoRa chip and supports both 868MHz and 915MHz bands, making it a flexible choice for IoT, wireless sensors, and remote monitoring. The board features a clear...
BoardWith Screen Frequency868MHz
• Dual Band Ham Two Way Radio : This walkie talkie has both VHF and UHF bands, allowing you to communicate over a wider range of frequencies. • FM Radio : With an FM radio built-in, you can listen to your favorite stations while on the go. • Handheld Transceiver : The handheld design...
Brand NameBaofeng Kit5W cable
0.0
In stock
MXN 98372 MXN 1,08762 -10%
+
Difference Deauther OLED V6 Deauther Monster  18650 Battery 1 2 FlashLight LED 1 4 USB Output NO YES Arcylic Case YES YES Battery Indicate YES YES Charging Current 1A 1A Breakout GPIOs YES YES RTC DS3231 YES YES Antenna 8dB 8dB Weight...
Elevate your signal processing with our high linearity, ultra-low noise amplifier , designed for optimal performance across a wide frequency range. Key Features Frequency Range: 100KHz to 6GHz Ultra-Low Noise Figure: 0.4 dB NF at 1.95 GHz High Gain: 20 dB at 1.95 GHz High...
VersionWithout Battery
Elevate your signal processing with our high linearity, ultra-low noise amplifier , designed for optimal performance across a wide frequency range. Key Features Frequency Range: 100KHz to 6GHz Ultra-Low Noise Figure: 0.4 dB NF at 1.95 GHz High Gain: 20 dB at 1.95 GHz High...
VersionWith Battery
T-Display-S3 Introduction The T-Display series has added a new member. It comes with the latest ESP32-S3 [Wi-Fi 802.11, BLE 5 + BT mesh]. The screen has also been expanded from the original 1.14 inches to 1.9 inches, and an acrylic plate has been added to fix it. This will be the second...
ColorGrey
This low noise amplifier (LNA) is designed for a wide range of RF receiving front-ends, offering high gain and a small noise figure to significantly enhance communication distance. It is ideal for applications like shortwave , FM broadcasting , remote control receivers , cable TV signal...
LILYGO TTGO T-SIM7000G is a small board for IoT and NB-IoT projects. It runs on an ESP32 and supports SIM7000G, SIM7000E, SIM7000A, and SIM7000JC modules. You get WiFi, Bluetooth 4.2, GPS, and your choice of 4MB or 16MB flash with 8MB PSRAM. The board is updated with better battery...
LILYGO TTGO T-SIM7000G is a small board for IoT and NB-IoT projects. It runs on an ESP32 and supports SIM7000G, SIM7000E, SIM7000A, and SIM7000JC modules. You get WiFi, Bluetooth 4.2, GPS, and your choice of 4MB or 16MB flash with 8MB PSRAM. The board is updated with better battery...
LILYGO TTGO T-SIM7000G is a small board for IoT and NB-IoT projects. It runs on an ESP32 and supports SIM7000G, SIM7000E, SIM7000A, and SIM7000JC modules. You get WiFi, Bluetooth 4.2, GPS, and your choice of 4MB or 16MB flash with 8MB PSRAM. The board is updated with better battery...
LILYGO TTGO T-SIM7000G is a small board for IoT and NB-IoT projects. It runs on an ESP32 and supports SIM7000G, SIM7000E, SIM7000A, and SIM7000JC modules. You get WiFi, Bluetooth 4.2, GPS, and your choice of 4MB or 16MB flash with 8MB PSRAM. The board is updated with better battery...
LILYGO TTGO T-SIM7000G is a small board for IoT and NB-IoT projects. It runs on an ESP32 and supports SIM7000G, SIM7000E, SIM7000A, and SIM7000JC modules. You get WiFi, Bluetooth 4.2, GPS, and your choice of 4MB or 16MB flash with 8MB PSRAM. The board is updated with better battery...
The LILYGO T-WATCH-S3 Plus is a feature-rich ESP32-S3 smartwatch development board for IoT, wearables, and smart projects. It offers 16MB Flash, 8MB PSRAM, and supports Arduino-IDE, ESP-IDF, VS Code, and MicroPython. Wireless: Wi-Fi 802.11b/g/n, Bluetooth BLE 5.0, SX1262 LoRa...
Frequency868MHz
The LILYGO T-WATCH-S3 Plus is a feature-rich ESP32-S3 smartwatch development board for IoT, wearables, and smart projects. It offers 16MB Flash, 8MB PSRAM, and supports Arduino-IDE, ESP-IDF, VS Code, and MicroPython. Wireless: Wi-Fi 802.11b/g/n, Bluetooth BLE 5.0, SX1262 LoRa...
Frequency433MHz
The LILYGO T-WATCH-S3 Plus is a feature-rich ESP32-S3 smartwatch development board for IoT, wearables, and smart projects. It offers 16MB Flash, 8MB PSRAM, and supports Arduino-IDE, ESP-IDF, VS Code, and MicroPython. Wireless: Wi-Fi 802.11b/g/n, Bluetooth BLE 5.0, SX1262 LoRa...
Frequency915MHz
The LILYGO T-WATCH-S3 Plus is a feature-rich ESP32-S3 smartwatch development board for IoT, wearables, and smart projects. It offers 16MB Flash, 8MB PSRAM, and supports Arduino-IDE, ESP-IDF, VS Code, and MicroPython. Wireless: Wi-Fi 802.11b/g/n, Bluetooth BLE 5.0, SX1262 LoRa...
Frequency2.4Ghz
Das MicroPhase ANTSDR E316 ist ein tragbares 2×2 MIMO Software Defined Radio (SDR) Demo-Board , das auf dem ADI AD9361/AD9363 RFIC und Xilinx Zynq-7020 SoC basiert. Es deckt 70 MHz-6 GHz mit bis zu 56 MHz momentaner Bandbreite ab und verfügt über 1 GB DDR3, 256 Mb QSPI Flash,...
Brand NameMicroPhase ChipsetAD9363
Das MicroPhase ANTSDR E316 ist ein tragbares 2×2 MIMO Software Defined Radio (SDR) Demo-Board , das auf dem ADI AD9361/AD9363 RFIC und Xilinx Zynq-7020 SoC basiert. Es deckt 70 MHz-6 GHz mit bis zu 56 MHz momentaner Bandbreite ab und verfügt über 1 GB DDR3, 256 Mb QSPI Flash,...
Brand NameMicroPhase ChipsetAD9361
This debugged finished product is ready to enhance your radio performance. Designed for direct connection to radios, it features an integrated transceiver switching mechanism. Utilizing an AB linear amplifier , this device efficiently amplifies power for SSB, CW, AM, and FM transmissions....
The LILYGO TTGO MySondy GO V2.1 is a compact and versatile receiver designed for RadioSonde signal acquisition and IoT applications. Built on the ESP32 platform with 4MB flash memory, it delivers reliable wireless connectivity through integrated WiFi 802.11 and Bluetooth V4.2 + LE. The device...
Frequency433MHz
• High Power Dual Band UHF VHF : Enjoy clear and stable communication with the high power dual band UHF VHF feature that allows you to connect to both frequencies. • IP68 Waterproof : The IP68 waterproof rating ensures that your walkie talkie can withstand harsh weather conditions and is...
Brand NameBaofeng ColorOrange
The LibreSDR B210 Mini / B220 Mini is a compact, full-featured software-defined radio (SDR) development board, fully compatible with B210 on Windows and Linux. Two models are available: B210 Mini (XC7A100T+AD9363) and B220 Mini (XC7A200T+AD9361); both offer the same functions but differ in...
BoardB220 mini
The LibreSDR B210 Mini / B220 Mini is a compact, full-featured software-defined radio (SDR) development board, fully compatible with B210 on Windows and Linux. Two models are available: B210 Mini (XC7A100T+AD9363) and B220 Mini (XC7A200T+AD9361); both offer the same functions but differ in...
BoardB210 mini
0.0
In stock
MXN 4,23896
+
Introduction The NFC Kill is the world's only RFID fuzzing tool. It is used to securely disable RFID badges, test RFID hardware, audit access control failure modes, and probe / exploit RFID attack surfaces during penetration testing. It is the only tool available to securely and...
EditionStandard
0.0
In stock
MXN 34,63203 MXN 39,13420 -12%
+
USRP B210 ist eine hochintegrierte, zweikanalige USB Software Defined Radio (SDR) -Plattform, die sich perfekt für fortschrittliche Wireless-Forschung, IoT-Prototyping und SDR-Entwicklung eignet. Mit dem Analog Devices AD9361 RFIC unterstützt sie den 2x2 MIMO -Betrieb und deckt einen...
0.0
_out_of_stock
MXN 2,77056 MXN 3,23810 -14%
+
Das HackRF R10C SDR Board bietet eine breite Frequenzabdeckung von 1MHz bis 6GHz und damit eine außergewöhnliche Flexibilität für die Erfassung, Dekodierung und Analyse von drahtlosen Kommunikationssignalen in GSM, LTE, Wi-Fi, ISM-Bändern und mehr. Er ist für eine konsistente Leistung und...
BundleBundle 1 BundleBundle 1
0.0
_out_of_stock
MXN 3,01299 MXN 3,23810 -7%
+
Das HackRF R10C SDR Board bietet eine breite Frequenzabdeckung von 1MHz bis 6GHz und damit eine außergewöhnliche Flexibilität für die Erfassung, Dekodierung und Analyse von drahtlosen Kommunikationssignalen in GSM, LTE, Wi-Fi, ISM-Bändern und mehr. Er ist für eine konsistente Leistung und...
BundleBundle 2 BundleBundle 1
Das HackRF R10C SDR Board bietet eine breite Frequenzabdeckung von 1MHz bis 6GHz und damit eine außergewöhnliche Flexibilität für die Erfassung, Dekodierung und Analyse von drahtlosen Kommunikationssignalen in GSM, LTE, Wi-Fi, ISM-Bändern und mehr. Er ist für eine konsistente Leistung und...
BundleBundle 1 BundleBundle 3
0.0
In stock
MXN 1,13610 MXN 1,24000 -8%
+
This is a kit designed for  Deauther MiNi V3. This kit includes Deauther MiNi V3, 800mAh battery, Type-c cable, 3dBi antenna, and a 3D-printed case for Deauther Mini. Just like the picture it is ready to use. When you receive it, please take out the Type-C cable first and then remove...
0.0
In stock
MXN 2,37212 MXN 2,71844 -13%
+
INTRODUCTION The Proxmark 3 RDV4 "BlueShark" Standalone Kit brings integrated, wireless standalone functionality to the Proxmark 3 RDV 4: Standalone Mode Offline sniffing Offline reading & simulation Built with penetration testers in mind, this upgrade consists of: Bluetooth...
0.0
In stock
MXN 8,95931 MXN 9,76970 -8%
+
Paketliste: 1. ANTSDR E310 x1 Zubehör (ohne Zubehör ist nicht in der Liste unten enthalten) 1. Aluminiumgehäuse (eingebaut) 2. Micro USB Kabel 3 Stück 3. 16GB Micro SD Speicherkarte 1 Stück 4. Kartenleser 5. Multi-Band 4G/3G/2G Monopole Antenne 3 Stück >
0.0
_out_of_stock
MXN 16,72087 MXN 17,24035 -3%
Merkmale: - RF-Betriebsbereich des SDR: 70 MHz-6 GHz - Kompatibel mit USRP UHD B2XX Treibern - Es unterstützt GNU Radio und Pothos SDR - USB 3.0 Hochgeschwindigkeits-Schnittstelle - Micro-B USB3.0 Anschluss - AD9361 12 bit ADC/DAC - CYPRESS CYUSB3014...
0.0
In stock
MXN 112,55411 MXN 125,00433 -10%
+
Der  SDR-LW 2972 ist eine vielseitige 2x2 MIMO Software Defined Radio (SDR) Plattform mit AD9361 RFIC , die einen Frequenzbereich von 70 MHz-44 GHz und 56 MHz Bandbreite pro Kanal unterstützt. Ausgestattet mit USB 3.0 Konnektivität und einem Artix 7 XC7A200T FPGA ermöglicht er...
0.0
In stock
MXN 14,20450 MXN 14,60277 -3%
+
Merkmale: - Die Leistungsindikatoren stimmen mit der importierten Version überein, und die Stabilität ist besser - Verwendung von Chips in Industriequalität, die den Temperaturbereich von -40 bis 85℃ unterstützen - Hochintegriert, Funkfrequenzbereich von 70MHz bis 6GHz - Unterstützung der...
• Dual Band Ham Two Way Radio : This walkie talkie has both VHF and UHF bands, allowing you to communicate over a wider range of frequencies. • FM Radio : With an FM radio built-in, you can listen to your favorite stations while on the go. • Handheld Transceiver : The handheld design...
Brand NameBaofeng Kit5W radio
3,2 Zoll Bildschirm 2500 mAh Akku Portapack H2 für HackRF One mit Aluminiumgehäuse
• Dual Band Ham Two Way Radio : This walkie talkie has both VHF and UHF bands, allowing you to communicate over a wider range of frequencies. • FM Radio : With an FM radio built-in, you can listen to your favorite stations while on the go. • Handheld Transceiver : The handheld design...
Brand NameBaofeng Kit5W 711
• Dual Band Ham Two Way Radio : This walkie talkie has both VHF and UHF bands, allowing you to communicate over a wider range of frequencies. • FM Radio : With an FM radio built-in, you can listen to your favorite stations while on the go. • Handheld Transceiver : The handheld design...
Brand NameBaofeng Kit8W 711
Show other 120 products
Product filters
Connector Type
Power
Filter by Rating
Price
MXN
MXN
  • MXN 228
  • MXN 692641
Free shipping
Brand
Colors
Battery powered
Display included
External reference clock I/O
HackRF board included
Host interface
Maximum measurement frequency
MHz
MHz
  • 3000MHz
  • 6200MHz
Maximum sweep points
points
points
  • 101points
  • 801points
Measurement capabilities
Minimum measurement frequency
MHz
MHz
  • 0MHz
  • 35MHz
RX maximum frequency
MHz
MHz
  • 6000MHz
  • 6000MHz
RX minimum frequency
MHz
MHz
  • 1MHz
  • 1MHz
Signal generator
Standalone operation without computer
Touchscreen support
Tracking generator
TX maximum frequency
MHz
MHz
  • 6000MHz
  • 6000MHz
TX minimum frequency
MHz
MHz
  • 1MHz
  • 1MHz