Test & Measurement

View all filters
Filter by Rating
Price
Free shipping
NanoVNA-F V3 is a Portable Vector Network Analyzer (VNA) with frequency range of 1MHz~6GHz. It can be used for S11 and S21 measurements. The S21 dynamic range of NanoVNA-F V3 is 65 dB, while the S11 dynamic range is 50 dB. NanoVNA-F V3 is suitable for antenna testing of MF/HF/VHF/UHF/SHF...
Connector TypeSMA Touch ScreenYes
1. 4.3-inch IPS LCD display, resolution 800*480, ultra-wide viewing angle, long-term use does not hurt your eyes; 2. All aluminum alloy case, sturdy and durable, effectively shielding electromagnetic interference to ensure measurement accuracy; 3. The body size is 125mm*75mm*20mm, compact and...
Connector TypeSMA Touch ScreenYes
SA6 is a simple portable spectrum analyzer and signal range, designed to display the signal spectrum in the frequency range of 35 to 6200 MHz. The analyzer finds the amplitude and frequency of the spectral components of the analyzed process. The spectrum analyzer can process signals from all...
BundleBundle 1 Touch ScreenYes
The NanoVNA-H4 is no ordinary instrument. This DIY marvel offers professional-grade vector network measurement capabilities in a compact, handheld form factor. Imagine a powerful tool that fits in your palm, boasting a vivid 4-inch LCD touchscreen display. Not only is it portable, but its...
Characteristics: -Screen size 4 inches -Spectrum Analyzer for 0.1-800MHz or, with Ultra mode enabled, 0.1MHz-6GHz -Signal generator with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4 GHz when not used as a spectrum analyzer. -Switchable resolution...
NanoVNA-H Features: 1. With the addition of the ABS casing and the new packaging, Compared to many customers using 3D printed housing, it saves costs. 2. Support typec-typec line, more convenient to connect to mobile phones ,Support to most Android phones with the same screen...
SA6 is a simple portable spectrum analyzer and signal range, designed to display the signal spectrum in the frequency range of 35 to 6200 MHz. The analyzer finds the amplitude and frequency of the spectral components of the analyzed process. The spectrum analyzer can process signals from all...
BundleBundle 2 Touch ScreenYes
User interface : * Display resolution 320*240 pixels * Screen diagonal 2.8" * 16 bits per RGB pixels * Resistive touch control * Jog switch control * USB serial port control * Optional TTL USART port (SW not yet implemented) on the internal PCB * Linear power supply to avoid switching...
The LibreVNA is a cutting-edge USB-based 2-port vector network analyzer designed for precision RF measurements from 100kHz to 6GHz. Featuring simultaneous dual-port sampling via 3 ADCs and FPGA processing, it captures 10,000+ measurement points in under 1 second. Encased in CNC-machined...
Malachite radio with medium and short wave option, dual antenna input, malahiteam DSP, 1) Based on SDR architecture, msi001 RF front-end is used for 12bit quantitative sampling, stm32h743 processor is used, and the main frequency is up to 480mhz; 2) The receiving frequency is 50 kHz to...
0.0
In stock
AUD 10303 AUD 12586 -18%
+
The NanoVNA VNA Vector Network Analyzer 2.8 inch LCD 50KHz-900MHz with Battery is a compact and portable vector network analyzer featuring a 2.8 inch TFT touch screen and a 400mAh built-in battery for offline use up to 2 hours. It supports a frequency range of 50KHz to 300MHz, extendable to...
ColorBlack
0.0
In stock
AUD 10303 AUD 12586 -18%
+
The NanoVNA VNA Vector Network Analyzer 2.8 inch LCD 50KHz-900MHz with Battery is a compact and portable vector network analyzer featuring a 2.8 inch TFT touch screen and a 400mAh built-in battery for offline use up to 2 hours. It supports a frequency range of 50KHz to 300MHz, extendable to...
ColorWhite
The 1.6-50MHz PWR SWR Meter offers precise power and standing wave ratio measurements across a wide frequency range of 1.6 to 50MHz. With a power measurement range of 0.5 to 150W and an accuracy better than ±5%, it is ideal for amateur radio operators and RF enthusiasts. Featuring a...
The 2025 TinySA ULTRA Plus ZS407 redefines portable RF analysis with its 7.3GHz frequency coverage and lab-grade performance in a handheld device. Featuring a vibrant 3.95-inch touchscreen (480×320 IPS-TFT), this analyzer delivers ultra-fast scans (165ms for 0-350MHz) and groundbreaking...
The SV6301A 7 inch 6.3GHz Vector Network Analyzer is a powerful and portable tool designed for precise testing of antennas, filters, amplifiers, cables, and other RF components across MF, LF, HF, VHF, and UHF bands. Featuring a large 7-inch IPS LCD with 1024x600 resolution and capacitive...
0.0
In stock
AUD 27708 AUD 30561 -9%
+
The Mini1300 is a handheld spectrum analyzer covering 0.1–1300 MHz for HF, VHF, and UHF bands. Housed in a rugged aluminum alloy shell with a 4.3″ capacitive touchscreen , it delivers real-time spectral displays, SWR, impedance (|Z|, R, ±JX), and return-loss measurements. Key...
The REDOT RD106P Digital SWR & Power Meter is a versatile, portable tool for FM, VHF, and UHF (80–999MHz) with max 120W power and VSWR display from 1.00 to 99.9. It supports DMR walkie talkies and RF devices, offering continuous and burst sampling, frequency compensation, and automatic...
KitRD106P Normal
The REDOT RD106P Digital SWR & Power Meter is a versatile, portable tool for FM, VHF, and UHF (80–999MHz) with max 120W power and VSWR display from 1.00 to 99.9. It supports DMR walkie talkies and RF devices, offering continuous and burst sampling, frequency compensation, and automatic...
KitRDP106P Extended
The LiteVNA-64 is a compact, portable vector network analyzer (VNA) with a wide frequency range from 50kHz to 6.3GHz. Featuring a 3.95" touch screen and MicroSD slot, it’s an upgrade over the NanoVNA—offering lower noise, higher reliability, and a broader measurement range....
The SA6 Plus / SA8 Spectrum Analyzer is a portable and versatile RF tool designed for real-time analysis and signal generation from 35 to 6200MHz. It displays the amplitude and frequency of spectral components for technologies like Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, and...
The RF Power Meter V7.0 is a high-performance, portable RF power meter supporting signals up to 10GHz. It features a 1.3-inch TFT LCD, built-in lithium battery for offline use, and a robust CNC aluminum alloy housing. With Type-C USB for power and high-speed data, and an N-type male RF...
Plug TypeWithout TTL cable
The RF Power Meter V7.0 is a high-performance, portable RF power meter supporting signals up to 10GHz. It features a 1.3-inch TFT LCD, built-in lithium battery for offline use, and a robust CNC aluminum alloy housing. With Type-C USB for power and high-speed data, and an N-type male RF...
Plug TypeWith TTL cable
The RF Series OLED RF Power Meter is a high-performance, portable RF power meter with a 0.96" OLED display (128x64 pixels) and selectable models for 500MHz, 3GHz, or 8GHz frequency ranges. Powered by micro-USB (5V), it features compact size, high accuracy, fast measurement, and a wide...
Plug TypeRF500
The RF Series OLED RF Power Meter is a high-performance, portable RF power meter with a 0.96" OLED display (128x64 pixels) and selectable models for 500MHz, 3GHz, or 8GHz frequency ranges. Powered by micro-USB (5V), it features compact size, high accuracy, fast measurement, and a wide...
Plug TypeRF3000
The RF Series OLED RF Power Meter is a high-performance, portable RF power meter with a 0.96" OLED display (128x64 pixels) and selectable models for 500MHz, 3GHz, or 8GHz frequency ranges. Powered by micro-USB (5V), it features compact size, high accuracy, fast measurement, and a wide...
Plug TypeRF8000
GS-320 handheld vector network analyzer VNA (reflectometer) 23-6200MHz is designed to measure the matching characteristics of passive and active radio equipment (antennas, cables, filters, attenuators, amplifiers, etc.). This device enables you to measure the parameters of complex reflection...
The TinySA ULTRA Plus ZS-406 redefines portable RF analysis with lab-grade performance in a compact handheld device. Featuring a 3.95" IPS-TFT touchscreen (480×320), it covers 900MHz–5.4GHz in Ultra Mode and delivers groundbreaking sensitivity down to -169dBm/Hz with LNA enabled....
0.0
In stock
AUD 16132 AUD 20840 -23%
+
The N1201SA+ is a handheld RF vector impedance analyzer covering 34.375 MHz to 2700 MHz . Its 2.4″ TFT display delivers real-time readings of resistance (R), reactance (X), SWR, and S11. Powered by a 2000 mAh internal battery or USB charger, it’s ideal for field and lab measurements with...
The TinyPFA Portable Phase Frequency Analyzer is a precision instrument designed for measuring phase and frequency differences between two input signals with exceptional accuracy. Operating across 1 MHz to 300 MHz, it's ideal for clock synchronization testing, RF analysis, and precision...
The LibreVNA 2.0 Upgraded Version is a USB-based full 2-port vector network analyzer covering 100kHz to 6GHz , designed by Jankae for serious RF development, antenna tuning, and lab-grade measurements in a compact form. Using three simultaneous ADC channels and FPGA signal processing, it...
The DL-30A Plus 50 Ohm Coaxial Dummy Load is designed as a stable RF terminator for walkie talkies, mobile radios, and test equipment over a wide DC–800MHz frequency range. Connected in place of an antenna, it simulates the antenna feeder and safely absorbs RF power, making on-bench or...
Connector TypeSMA Male Impedance50 Ohm
The DL-50A 50 Ohm Dummy Load is designed for accurate power and SWR testing of radio stations, walkie talkies, and RF equipment over a wide DC–1000MHz frequency range. Connected to an SWR/power meter or directly to the radio, it provides a stable 50 Ohm termination and converts RF energy...
Frequency RangeDC - 1000MHz Impedance50 Ohm
This 10W SMA Male Dummy Load delivers precise 50 Ohm RF termination for testing transmitters, antennas, and RF equipment across the full DC-3GHz spectrum. Ideal for lab bench testing, production quality control, and field service, it provides a stable load that safely absorbs RF power...
Connector TypeSMA Male Frequency RangeDC - 3GHz
This 100W RF Dummy Load provides a stable 50 Ohm termination for testing high-power transmitters, walkie talkies, shortwave radios, FM stations, and RF equipment across DC-3GHz . Connected between your radio and SWR/power meter, it delivers accurate power measurements by replacing...
Connector TypeSMA Male Frequency RangeDC - 3GHz
The 200W DC-3GHz Coaxial Dummy Load with N-Type male connector is designed for testing high-power radio transmitters, mobile radios, walkie talkies, and RF systems across the full DC-3GHz frequency range. It provides a precise 50 Ohm termination that absorbs RF power safely while enabling...
Frequency RangeDC - 3GHz Impedance50 Ohm
This 2W DC-4GHz RF Dummy Load provides precise 50 Ohm termination for RF testing, equipment evaluation, and antenna port protection across the DC to 4GHz frequency spectrum. Perfect for microwave lab work, production testing, and field service, it safely absorbs RF power while maintaining...
Connector TypeSMA Male Frequency RangeDC - 4GHz
The 200W DC-3GHz Coaxial Dummy Load with N-Type female connector is designed for testing high-power radio transmitters, mobile radios, walkie talkies, and RF systems across the full DC-3GHz frequency range. It provides a precise 50 Ohm termination that absorbs RF power safely while...
Connector TypeFemale Frequency RangeDC - 3GHz
This 100W RF Dummy Load with UHF PL259 male connector provides a precise 50 Ohm termination for testing high-power transmitters, antennas, and RF equipment across DC-1GHz . Perfect for ham radio operators, CB radio technicians, and RF service shops, it safely absorbs RF power during SWR...
Connector TypeSMA Male Frequency RangeDC - 1000MHz
This 2W DC-6GHz RF Dummy Load provides precise 50 Ohm termination for RF testing, equipment evaluation, and antenna port protection across the full DC to 6GHz frequency spectrum. Perfect for lab work, production testing, and field service, it safely absorbs RF power while maintaining...
Connector TypeSMA Male Frequency RangeDC - 6GHz
This 10W N-Type Male Dummy Load provides a precise 50 Ohm termination for RF testing, antenna port protection, and transmitter evaluation across a wide DC–3GHz frequency range. Designed as a high-quality coaxial load, it safely absorbs RF power and simulates antenna impedance for accurate...
Connector TypeSMA Male Frequency RangeDC - 3GHz
The DL-30A 50 Ohm Coaxial Dummy Load is designed to provide a stable RF termination for testing transmitters, antenna ports, and RF equipment over a wide DC–500MHz frequency range. Connected in place of an antenna or feeder, it safely absorbs RF power and simplifies bench and field...
Connector TypeSMA Male Frequency RangeDC – 500MHz
This 25W DC-4GHz N Male Dummy Load provides precise 50 Ohm RF termination for testing professional RF equipment, base stations, amplifiers, and microwave systems across the full DC to 4GHz spectrum. With robust power handling and excellent VSWR characteristics, it's ideal for laboratory...
Connector TypeSMA Male Frequency RangeDC - 4GHz
Product filters
Filter by Rating
Price
AUD
AUD
  • AUD 35
  • AUD 1641
Free shipping